How to Connect to the "Mines" Network with personal devices

1. Click on the Wi-Fi icon in the bottom-right corner of your screen to open the Wi-Fi settings.
2. Select the Mines Wi-Fi network.
3. When prompted, enter your Mines email address and password.
4. If your username (email) and password are correct, a certificate warning will pop up. Click Connect to complete your connection to the network. (Optionally, click "Show certificate details" if you would like to verify the certificate.)
5. Click Connect to finalize your connection to the "Mines" Wi-Fi network.

1. On your phone, swipe down from the top of the screen to open the quick settings drop-down menu. Tap the Wi-Fi icon to turn Wi-Fi on (ensure it is active and not greyed out).
2. Tap the Wi-Fi drop-down arrow below the icon to open the list of available Wi-Fi networks.
3. Select the Mines network.
4. In the pop-up window, populate the necessary fields to match the settings below, then tap Connect:
   EAP method: PEAP
   Phase 2 authentication: MSCHAPv2
   CA Certificate: Use system certificates
   Domain: mines.edu
   Anonymous Identity: (MAKE SURE THIS IS BLANK)
   Identity: username@mines.edu
   Password: Your Mines password
5. You should now be connected to the "Mines" wireless network.

1. On your Chromebook, click on the quick settings panel at the bottom right of your screen.
2. Click the Wi-Fi button.
3. A list of available wireless networks will appear. Select Mines.
4. In the popup window, populate the necessary fields to match the settings below, then click the Connect button:
   EAP method: PEAP
   Phase 2 authentication: MSCHAPv2
   Server CA certificate: Do not check
   Identity: Enter your Mines email address
   Password: Your Mines password
   Anonymous Identity: (MAKE SURE THIS IS BLANK)
5. You should now be connected to the Mines Wi-Fi network.

Ensure you have connected your computer to the network port with an Ethernet cable before starting these steps.

1. From the Windows Start screen, type services and press Enter to search for and open Windows Services.
2. Right-click on Wired AutoConfig and select Properties.
3. Set Startup type to Automatic.
4. Click Start and wait for the service to start.
5. Click Apply and then click OK.
6. A login window prompt will appear. Enter your Mines email address and password.
7. You should now be connected to the "Mines" network.

1. Go to System Settings on your MacOS device.
2. Click Network, then click Ethernet  or Thunderbolt.
3. Click the Details button on the right.
4. Select 802.1x and ensure Enable automatic connection is toggled ON.
5. Click OK and exit System Settings.
6. Plug in your Ethernet cable to receive a credentials pop-up window.
7. Enter your Mines email address and password, then click Join.
8. You should now be connected to the "Mines" network.

1. Click on the Applications icon.
2. Use the search bar to find and open Advanced Network Configuration.
3. Click the + button on the window that appears to create a new connection.
4. Select Ethernet from the drop-down menu, then click Create.
5. Name your connection 802.1x and navigate to the 802.1x Security tab.
6. Check the Use 802.1x security for this connection checkbox.
7. Configure the connection using your Mines email address and password alongside standard PEAP/MSCHAPv2 settings, then click Save.
8. To activate the connection, click on the Network Manager icon in your system bar.
9. Click on your Wired connection.
10. Select the 802.1x connection you created and wait 15–20 seconds to establish connection.
11. You should now be authenticated to the "Mines" 802.1x wired network.
    
    For screen shots of these steps, see How to Connect to Mines Wired 802.1x Network (Linux Ubuntu).